What's New at Equustek
Solutions
EQ7000 ETHERNET IP-DH+ Communication Controller. Connect your legacy network with Ethernet IP through DH+.
EQ-DCM (EQUUSTEK-DATA CONTROL MASTER): AB Ethernet to DF1 communication controller.
DL6000-MEDH+/MEDH485: Modbus TCP to DH+ Gateway/Modbus TCP to DH485 Gateway.
PLC Global Status Word (GSW) Passing Across Bridging Products
The DL3500 Bridge for DH+ networks now have the ability to pass the
PLC's Global Status Words (GSW) from one DH+ to another through the
serial bridge. This ability is user configurable to be either
off or to passed depending on the number of DH+ Token Rotations. This allows
PLC's on one DH+ network to be able to see the GSW's of PLC's on the other
DH+.
DL3500-SLC5/04
Bridge - DH+ to DH-485 Bridge via a SLC5/04 with DH-485 Pass Thru
Available NOW ...... Allows access to your DH-485 device (PanelView)
connected to the DH-485 CH0 of your SLC 5/04 using a standard DF1 driver.
DH-485 Pass Thru
Enabled has to be set in the SLC 5/04. The DH-485 node will appear as if it
is on the DH+ network using the RSLINX RS232-DF1 driver (set for 1770-KF2
mode)
and the WHO ACTIVE. You will also be able to see all other DH+ nodes and be
able to go online with your PLC/SLC on the DH+.
Before you were limited to using RSLINX and (P)KTX(D) or PCMK cards, so it
is a lower cost alternative for accessing your DH-485 device via the DH+ network.
New 2 Year Warranty
The manufacturers defect warranties on all registered product sales
will be increased to two years
To register your recent purchases please send Name, Address, Model
#, serial # and a copy of the receipt of purchase to Equustek Solutions
Inc. #286 - 5489 Byrne Road, Burnaby, B.C. Canada V5J 3J1, Fax:
604-266-9547.
Configuration Software for DL products
New Releases Available NOW ...... New versions of DL32 for DL4500, DL4000, DL3500, DL3000, DL2000, and Interface Cards are available. Please check if your current versions are up to date.
Plug and Play DLPCI with A-B's DH-485
Available NOW ...... Connect your PC's and MMI's and other OEM equipment
with a Plug and Play PCI bus to A-B's DH-485 network It will use existing
standard DF1 drivers to emulate a 1770-KF3. This will keep all DH485
timing on the interface card and allow Windows to operate without
added timing considerations.
DL3500-DH-485 - RS232/422/485 and USB Interface to A-B's DH-485
Available NOW ...... Connect your PC's and MMI's and other DF1/Modbus/Serial Equipment to A-B's
DH-485 network It is a lower cost alternative to A-B's 1770-KF3.
|