interfaces Serial ASCII devices (Scanners/Printers) to SLC’s or other
devices on an A-B DH-485 or DH+ network.
The DL3500 has two communication ports. Channel A is designed to connect to you industrial
network, either A-B’s DH+ or DH-485 networks. Channel B is used to connect to your serial or
USB device, the protocol depends on which flavor (model) of the DL3500 you have ordered.
Channel B has the capabilities of RS232C, RS422, RS485 and USB 2.0.
Configuration of the operating parameters is done quickly and easily by the DL32 V3.X
windows based software shipped with the unit or available on the Equustek Website
DL3500-ASCII – DH-485/DH+ to ASCII Scanner/Printer interface