DL4500-EDH+ Ethernet TCP/IP to Allen Bradley’s DH+

Lightweight, Din Rail Mounted, DC powered network interface bridge. Uses Lantronix’s industry proven 10-Base T Ethernet TCP/IP module to access Allen Bradley DH+ networks. Data highway plus auto baud detection and other features make Telneting over Ethernet to the Lantronix Module the only configuration needed for the TCP/IP version. The DL4500-EDH+ encapsulates DF1 packets over Ethernet. The DL4500-EDH+ does not support Allen-Bradley Ethernet (CSP) or Ethernet/IP protocols. Ethernet based processors like the Allen Bradley ControlLogix can not access the DH+ network using the DL4500.

The DL4500-EDH+ available in two different models: the DL4500-EDH+ DF1-MultiMaster and the DL4500-EDH+ Standard Tunnel. The DL4500-EDH+ DF1-MultiMaster allows up to 4 computers to connect simultaneously to the ethernet side of the DL4500. This model has slower data exchange speeds because of its ability to connect to multiple computers. If speed is an issue, consider the DL4500-EDH+ Standard Tunnel model. The DL4500-EDH+ Standard Tunnel allows only 1 computer to connect to the ethernet side of the DL4500 but exchanges data at faster speeds.

Documentation

• DL4500-User Manual
• Change Firmware DL4500 from Standard Tunnel DF1 to Mutil Matser DF1
• Change Firmware DL4500EDH+ from Mutilmatser DF1 to standard Tunnel DF1
• Change Firmware DL4500EDH485 from Mutilmatser DF1 to standard Tunnel DF1
• Com-Port-Redirector-Quick Start
• DL4500 RSLINX Quick Start
• DL4500-EDH+ Spec Sheet
• Accessing DH+ PLC5 & SLC504 with DL4500 using Kepware kepserver Encapsulated DF1 Ethernet driver
• DL4500EDH+ STD with IGS demo using Encapsulated DF1
• DL4500-EDH485 Spec Sheet
• Kepware Setup
• DL4500 Lantronix Device Installer Version 3.6 Quickstart Manual
• DL4500-EDH+/485 Hardware Quick Start Application note
• DL4500 Lantronix Redirector Software Manual

• DL4500-EDH+ allows DF1 serial drivers to communicate over Allen Bradleys DH+ network via TCP/IP protocol.
• DL4500-EDH485 allows DF1 serial drivers to communicate over Allen Bradleys DH-485 network via TCP/IP protocol.

• Trihedral VTSCADA & DL4500-EDH+ using AB Encapsulated DF1 Driver no comport redirector
• Trihedral VTSCADA setup with DL4500-EDH+ using Allen Bradley DF1 Driver
• Wonderware Application Note–The ABKF2 I/O Server
• Wonderware Application Note–The WWRSLinx I/O Server

Application Diagrams

• DL4500 EDH+/EDH-485 Application Sample Diagram

Videos

• How to Set the IP Address and the serial Telnet Settings for Equustek DL4500 EDH+ Standard Tunnel
• How to set Allen Bradley RSLINX DF1 Driver for Equustek DL4500-EDH+ Ethernet TCP/IP ( Tunneled DF1 )to DH+ Protocol Converter
• How to Set the IP Address and the serial Telnet Settings for Equustek
• If Equustek DL4500 is Not found using Lantronix Device Installer or even using ARP then find out here how to set it’s IP address

Inquire Now